AREAS OF ACTIVITY

Kanaz operates as a service bureau and consultant based in Tehran. Due to our Knowledge, experiences and understanding of the regulations in Iranian Oil Industry and our specific skills, Kanaz provides services in the following fields:

5.1 Engineering

5.1.1 UPSTREAM

5.1.1.1 Subsurface Engineering Services

- Oil Gas Field study
- Geophysics, Operation QC
- Geology, Geo-modeling
- Production Engineering
- Project Management
- Petroleum Data Management
- Project supervision and commissioning
- Evaluation and assisting by preparation of bids and proposals

5.1.2& DOWNSTREAM

5.1.2.1 Basic Design; Detail Design

5.1.2.1.1 PROCESS SAFETY

- Process Job Description
- Preparation of process simulation models
- Preparation of process and utility heat and material balances
- Preparation of PFDs, PIDs and UFD
- Verification of equipment sizing and updating data sheets
- Hazardous gas Detection
- Determine requirements for hazardous gas detection
- Determine locations for hazardous gas detection
- Develop hazardous gas detection block diagrams
- Develop hazardous gas detection location drawing
- Fire water, Fire spray and foam system
- Determine the fire protection requirement
- Develop PID for protection systems and facilities
- Develop equipment layout for fixed fire protection systems
- Develop equipment layout for portable fire protection systems at the facilities
- Fireproofing

5.1.2.1.2 PIPING PLANT DESIGN

- Plant Design 3d Modeling
- Equipment Layout
- Piping, Equipment, Civil, Structure, Electrical, instrument 3d Modeling
- 30%, 60% and 90% Model Reviewing
- Clash checking
- Extracting Isometric Drawings from PDMS.
- Material Engineering
- Material Selection
- Preparing Piping Material Specification
- Material Take Off
- Preparing Material Requisition
- Support Engineering
- Preparing Standard Pipe Support
- Preparing Pipe Support list
- Designing Special Pipe Support
- Stress Analysis
- Preparing Stress Analysis Criteria
- Preparing Critical Line List
- Stress Analysis by Caesar II
- Preparing Stress Analysis Report
- Drafting
- Plot Plan Drawing
- Key Plan Drawing
- Piping Plan Generation
- Isometric Drawings

5.1.2.1.3 CIVIL

- Final rough grading plan
- Finish grading plan
- Underground system layout
- Cooperation with other disciplines, like electrical, instrument, structure and … for contact points.

5.1.2.1.4 STRUCTURE

- Structural design for all industrial structures, such as pipe racks, support structures, holders and other miscellaneous structures.
- Equipment foundation design which comprises stationary equipments, rotary equipments and packages.
- Cooperation with other disciplines, like electrical, instrument, civil and … for contact points.

5.1.2.1.5 BUILDING

- Building architectural design
- Building structural design
- Cooperation with other disciplines, like electrical, instrument, civil and … for contact points.

5.1.2.1.6 MECHANIC

- Review and Endorsement of Basic Design Feed Package (in current work)
- Review and Update Mechanical Data Sheets for Each of Equipment
- Preparation of Mechanical Calculation and Engineering Drawings
- Review of 3D Modeling Related to Rotating Equipment
- Preparation of Material Requisition at first for Long Lead Delivery Items and after for Remained Items
- Preparation of Technical Bid Evaluation
- Review of Purchase Order Requisition
- Vendor Documents Review and Check
- General arrangement, detail and fabrication, template, anchor bolt, ladder and platform drawings
- ITP, NDT, PWHT, Hydro Test, Transportation, Construction and Commissioning Procedures
- WPS and PQR

5.1.2.1.7 ELECTRICAL

- Basic Design Engineering Services
- Basic review and endorsement
- Detailed Design Engineering Services
- Procurement related engineering

5.1.2.1.2 Planning and project control

- Contract / Tender Document Review
- Cooperation with other Involved Departments in Feasibility Studies
- Providing Work Breakdown Structure (WBS)
- Providing project master plan
- Providing Detailed Time Schedule With Relation and allocate Resources
- Up-dating time schedule in the defined time intervals
- Provide Catch up Plan (if required)
- Providing Master Document List (MDL)and up-dating the data bank
- Providing S-curve of project progress for each discipline and up-dating it in specific time intervals that client determines
- Calculating and estimating the project progress in monthly intervals otherwise client specifies
- Providing monthly work plan and informing different project engineering disciplines for following the plan.
- Providing project weekly and monthly reports

5.1.2.1.3 Quality control and Quality Assurance

- Considering of Project Execution Plan in cooperation with the project manager for Covering all quality requirements
- Providing Project Quality Plan based on the client requirements
- Monitoring and Cooperation for Preparation of all Departments Systemic Documents include Job Descriptions, Procedures and Instructions,Input and Output Quality Control Check list, Work flow and So on.as QMS systemic Doc.
- Surveillance of the quality control check list and engineering procedures usage
- Auditing the project management and design team and sending Corrective action Requisition form and pursuing it until achieving the desired results
- Updating the accessible information to the project engineering team for external auditing by the client or its representative
- Providing Risk Assessment and Registration and analyzing it in cooperation with project management
- Receiving the project lessons learnt from different engineering divisions for using in the future projects
- Training the quality management system ( QMS ) and documenting for the project experts

5.1.2.1.4 DOCUMENT CONTROL

- Receiving e-files, registering and sharing them with different disciplines
- Sending documents to the client, suppliers other partners of the project
- Sending information and technical documents including MRs, drawings, documents and reports to the client and other partners
- Classifying the project transmittals in terms of their numbers in two parts,sending to the client and receiving from the client.

5.1.2.1.5 INFORMATION TECHNOLOGY

- The responsibility of IT is "the study, design, development, implementation,support and management of computer-based information systems, particularly software applications and computer hardware."
- IT deals with the use of electronic computers and computer software to convert,store, protect, process, transmit, and securely retrieve information.
- IT professionals perform a variety of duties that range from installing applications to designing complex computer networks and information databases.

5.2 ENGINEERING SERVICES FOR PROCUREMENT

- Expedition after PO such as receiving the ITP QTP schedule time of project from the seller for controlling with client requirements by Eng.
- Providing monthly reports of inspection status of all P.O to the client
- Receiving the documents about approving the qualification of the contractor's personnel in the welding affairs and non-destructive tests done by third party
- Reviewing materials certificate and tests reports provided by third party
- Providing Inspection Release Note (IRN)
- Shipping Release Note (SRN) and permit delivering goods to the site
- Reviewing Manufacturer's Data Record (MDR)
- custom clearance issues
- Stock management

5.3 Inspection

Initially, Kanaz reputation was established in providing full range of inspections in downstream sector, performed in close co-operation with Rosen Group from Europe. Rosen is a company driven by the technological challenges of designing innovative inspection equipment and has a leading position in the In- line Inspection market. The company considers the inspection of oil and gas pipeline by means of sophisticated equipment as an essential part of pipeline integrity and risk management. Rosen has developed the most sensitive metal loss inspection tools based on Magnetic Flux Leakage (MFL) available today.

- In-line Pipeline Inspection in co-operation with Rosen Engineering Group
- Arranging for routine inspection program based on RBI Quantitative method according to APT publication 581 latest versions
- NDT inspection
- Tank Bottom inspection
- Complete survey for cathodic protection (C.P) system including the level of protection and the condition of Anodes and Cables
- Feasibility studies for new systems and rehabilitation of existing ones

Kanaz can provide the majority of skills and services. Our operational team is composed of skilled and experienced engineers with many other freelance engineers and technicians who can be employed according to the needs of projects. Where Kanaz does not provide specific expertise, established links are maintained with leading service provider who can supply these complementary services.

viagra suisse levitra precio viagra generico cialis 20 mg viagra online viagra online viagra originale cialis senza ricetta viagra prezzo viagra generico kamagra italia acquisto levitra levitra 20 mg viagra generico viagra prezzo cialis originale